- Entire and reproducible homogenizing
- Efficient sample cooling during the whole preparation
- Flexible homogenizing system for various starting materials
- Broad portfolio of Lysis Tubes enables individual extensions of the homogenizing system
- Touch control panel and large display provide considerable operating convenience
- Pre-programed protocols or user-defined programing with freely selectable parameters
- Compact construction
- Can easily be operated continuously with
- No tools required to operate the instrumenty
- Homogenizing comparably low-noised
- Technical Data
Homogenizer for various starting materials
The SpeedMill PLUS is a highly efficient homogenization system for various starting materials used for the subsequent isolation and purification of DNA, RNA or proteins. The homogenization process is based on an innovative mechanical principle for which a patent has been filed. This new process allows users to operate the SpeedMill PLUS continuously if necessary. The high efficiency of energy input into the sample, based on a vertical movement, procures a homogeneous disruption of the sample without destroying the target molecules.
Efficient sample cooling: prior, during and after preparation
For the optimized sample holder, which is used inside the SpeedMill PLUS, different temperature ratings are freely selectable due to the storage down to –80 °C. According to this an efficient sample cooling during the whole homogenization process is warranted and the substantial sample warming that occurs with other homogenizers is prevented. The often problematic handling of liquid nitrogen or dry ice is thus a thing of the past. Additionally the considerably expense factor of this additives, which have to be loaded continuously, is not applicable. Besides the sample holder allows an easy transport of the sample tubes and a long term storage of starting or homogenized material at adequate temperatures.
Modern preparation of samples: SpeedMill PLUS
The samples to be processed are rapidly and efficiently homogenized in Lysis Tubes that have been specially optimized for the system and, as such, contain different and/or application-specific beads. Using beads makes it possible to completely and reproducibly homogenize even the toughest starting materials, such as cartilage and chitin shells of insects or ticks within a very short time. 2.0 ml and 0.5 ml containers (Lysis Tubes) with different beads are available for sample preparation, allowing users to adapt sample processing to a diverse range of soft and hard starting materials. Operating processes, such as loading and removing of the sample tubes, are very simple and no tools are required. In addition userdefined protocols can be entered and saved as well as pre-installed programs are available. Homogenization parameters, like time and using cyclic routines are freely selectable.
Optimized extraction kits for the SpeedMill
The SpeedMill also accommodates kits for complete nucleic acid (DNA and RNA) isolation from various starting materials. All kits have been optimized for the SpeedMill for extremely fast and efficient nucleic acid isolation. The yields produced are impressively high and the quality of the isolated nucleic acids is outstanding. These kits contain special Lysis Tubes with application-specific beads as well as pre-made buffers.
They also contain all other components needed for isolating DNA or RNA from different starting materials. Optimized kits for sample processing with the SpeedMill results in extremely rapid and highly efficient nucleic acid isolation. Both the yield and quality of the nucleic acids are excellent. The standard isolation protocol requires only about 20 to 30 minutes.
|Homogenization time||30 sec to 4 min (depending on the starting material)|
|DNA/RNA purification time||20 - 30 min for standard protocols (complete nucleic acid purification)|
|Device handling||Stand-alone device, simple starting and handling of device by using modern touch sensors|
|Acceleration time||No acceleration|
|Deceleration time||No declaration|
|Homogenization routines||User-defined programming with user-defined parameters, as well as pre-programmed protocols|
|Sample handling||Simple sample tube loading and removal|
|Sample capacity||Up to 20 samples simultaneously|
|Sample cooling||Passive cooled sample holder; storage at temperatures down to –80 °C|
|Homogenization time range||1 sec to 4:59 min|
|Steps of adjusting time||1 sec|
|Number of cycles||1 - 99|
|Protocol steps||1 - 6|
|Lysis Tubes||Broad ranged portfolio of chooseable Lysis Tubes with various volumina and beads|
|Complete purification||innuSPEED Kits containing Lysis Tubes for standardized starting materials enable effective extraction
of nucleic acids without previous homogenizing optimization
|Other technical data|
|Dimensions (W × H × D)||154 × 275 × 257 mm|
|Power Supply||AC 220 V, 50 Hz/110 V, 60 Hz|
|Power consumption||150 W (max.)|